Hard Bricked MTK Recovery Guide Part 2

Before anything else make sure that you have downloaded what is needed before you proceed in flashing but if you get redirected here first instead on the Part 1 you may also click the ff. link in order to go to the First Part of this tutorial:

Hard Bricked MTK Recovery Guide Part 1

please remember that the hard bricked phone DOESN'T EVEN TURN ON, ITS NOT CHARGING, AND THERE IS NO SIGN THAT ITS ALIVE, the soft bricked phone is different because the soft bricked phone can still go to recovery mode,


Okay here we go:

Turn Off your phone
prepare your DATE CABLE
remove your phone's battery
insert the data cable to your phone and your computer
make sure its detected and the drivers will automatically install
if the VCOM was not connected, put the battery and reinsert the usb cable while holding VOLUME UP BUTTON

then the new drivers will automatically install
open the FLASH TOOL that you have downloaded on the first page


MAKE SURE YOU HAVE THE RIGHT ROM FOR YOUR PHONE

if not you can still download the ROM to the following link:
http://www.needrom.com/

First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(MT6XX_Android_scatter_emmc.txt or MT6XX_Android_scatter_emmc.txt, depending on which phone you have) for your device and ignore any message that may appear.

Remove the DATA CABLE on your phone, CLICK THE DOWNLOAD and reinsert the DATA CABLE WHILE HOLDING UP BUTTON (MAKE SURE THAT THE BATTERY WAS NOT ON THE PHONE)

if the RED 100% BAR didn't resume, insert the battery on the phone while holding up button so it could be detected faster

when you see the GREEN CIRCLE its done, turn on your phone because its back to life now

just a simple advice (MAKE SURE TO FLASH ONLY THE ROM THAT MATCHES ON YOUR PHONE) if not it will never go back to life anymore